CLEARSPAN
™
GARAGES
4
Revision date: 09.14.10
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may be
needed depending on the structure, location, and
application.
• Tape measure or measuring device
• Scissors and chalk line (optional)
• Marker to mark locations on the pipes
• Variable speed drill and impact driver (cordless with
extra batteries works best)
• Metal-cutting tool for pipe
• Wrench, ratchet and socket (recommended)
• Hammers and gloves
• Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the shelter
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the shelter.
1. Unpack the contents of the shipment and place where
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of Materials/Spec
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
shelter diagrams for clarification, or contact Customer
Service.
NOTE:
At this time, you do not need to open the plastic
bags containing the fasteners (if used).
ANCHORING INSTRUCTIONS
Prior to assembling this shelter, please read the
MUST
READ
document included with the shipment.
WARNING:
The anchor assembly is an integral part
of the shelter construction. Improper anchoring may
cause shelter instability and failure of the structure.
Failing to anchor the shelter properly
will void the
manufacturer’s warranty
and may cause serious injury
and damage.
The diagrams below illustrate two possible ways to properly
anchor the shelter to the site.
Install an anchor at each rafter leg along each side of the
frame.
The parts shown in the diagrams regarding anchor systems
are
not included
with the shelter.
Contact Customer Service
at 1-800-245-9881 to purchase additional parts to anchor
the shelter.
Anchor System
for use on concrete.
Ground Anchor System
