ClearSounds QLinkTV, Руководство пользователя

Страница: 19 / 30

Pairing
17
Pairing to Bluetooth Devices
Things to note:
•
Pairing mode will last 1 minute. If no devices can be connected within that
minute, the QLinkTV will enter standby mode and you will need to restart the
pairing process.
•
The QLinkTV can only be paired to 1 Bluetooth stereo receiver at a time.
•
The QLinkTV can remember up to 8 paired devices. When the number of paired
devices exceeds 8, the least-recently connected (used) device will be replaced.
•
The QLinkTV will pair with any Bluetooth stereo receiver whose PIN is ‘0000’,
‘1234’, ‘1111’ or ‘8888’.
•
The +/- switch on the back of the transmitter should not be used unless you
plan to go an extended time without using your QLinkTV. For normal use, use
the MFB to turn the QLinkTV on and off as detailed on page 13.
•
All Bluetooth-enabled devices can sometimes cause a slight delay or echo in
the sound transmission. This latency is typically about 25-50 milliseconds, less
than a quarter of a second.