ClearSounds QLinkTV, Руководство пользователя

Страница: 16 / 30

14
Attaching
Attaching the QLinkTV
Before attaching to your TV, computer or audio device, refer to the instructions below
for information on connecting to the correct type of audio output jack.
The QLinkTV must be connected to an analog or a 3.5mm stereo audio output jack. Be
sure to find the audio OUTPUT (‘audio-out’) jack, which is different than the audio input
(‘audio-in’) jack. The QLinkTV is designed to send sound out of your TV or other device
and into your Bluetooth headset, so it will not work with the audio-in jack.
Please note: The location of the audio output jack is different for every TV, so refer to
your TV’s user guide for its exact location. If you cannot find your user guide, locate
your TV’s model number (typically listed on a sticker on the back side) and do an
Internet search to find it using your TV model number and the words “user guide.”
Attaching the QLinkTV to a 3.5mm headphone jack on your TV:
Using your TV’s user guide, locate its 3.5mm audio-out (headphone) jack, which is likely
on the back side. Plug one end of the 3.5mm audio cable into the QLinkTV as shown on
page 11. Plug the other end of the 3.5mm audio cable into the 3.5mm audio-out jack
on your TV. The volume of the audio-out jack will be controlled by your TV’s volume
control, unless the TV has independent controls specifically for the headphone jack.