82
Aavelin
User
Manual
Refer to page 17 of the Weather Station manual for specific
mounting and sensor placement tips.
Installing the Anemometer (Wind Vane)
The Anemometer connects to the port on the Junction
Box indicated by this icon:
Refer to pages 12 and 19 of the Weather Station manual for
additional information on the Anemometer.
Installing the Rain Gauge
The Rain Gauge connects to the port on the
Junction Box indicated by this icon:
Ensure that the Rain Gauge is installed in a location where rainfall
will be completely unobstructed.
Connecting to the Aavelin
Weather Data is delivered to the Aavelin using the included
Aavelin Data Logger Cable.
Connect one end of the cable to the port on the side of the
Ultimeter, and plug the other end into the port labeled COM2 on
the back of the Aavelin.
Once the connection is made, press and hold the following keys
together for 3 seconds:
The display should blink approximately 3 times, and return to
normal. The Ultimeter is now set to output Serial Data in a way
that the Aavelin can understand.
Using the Weather Station with Aavelin Composer
With the Weather Station hardware installed, the final step is to configure
the project to display the desired weather data.
Содержание magicbox aavelin
Страница 2: ... 2 Aavelin User Manual ...
Страница 10: ... 10 Aave ...