Aavelin User Manual
89
Set the COM port properties as
pictured above.
Bits per second
: 38400
Data bits
: 8
Parity
: None
Stop bits
: 1
Flow control
: Xon/Xoff
Press the ‘OK’ button to connect.
The network addresses can be set using
the following commands. Note that
each command is preceded with ‘* ‘
(the asterisk character [shift-8] and a
space).
The characters you type will
not be displayed, only the response from the player after pressing ‘Enter’.
IP Address: * ipa xxx.xxx.xxx.xxx
Subnet Mask: * ipm xxx.xxx.xxx.xxx
Gateway: * gip 0 xxx.xxx.xxx.xxx
Note: Multiple gateway addresses are allowed. In the
example above, the primary gateway is set. To set
additional gateway addresses, change the 0 to 1-3 (4 total
address allowed.
Additional commands can be issued while connected to change various
settings of the player. Some of the more common commands are listed here.
Blanking
Sets the output of the Adtec player when no spot is being played.
Recommended: Black
* bl black
Repeat
Causes MPEG spots to play repeatedly. Default is on, recommended:
Off
* rpt off
Содержание magicbox aavelin
Страница 2: ... 2 Aavelin User Manual ...
Страница 10: ... 10 Aave ...