76
Aavelin
User
Manual
After power-up, if there continues to be no display, check
cable routing; especially if the cables are routing through
the VTR/DVD. This can be a common source of trouble.
This problem is resolved by referring to the VTR/DVD
Manufacturer’s instructions for setting the Video Input.
Aavelin Playback VTR Playback Setup
With the Aavelin system Powered Up and running, press the Menu key on
the keypad. This will bring up a Main Menu. Proceed by selecting the IR
Setup option.
The IR setup menu, similar to the picture below, will appear. Use the Up,
Down, Left and Right arrows to navigate this menu.
There are three panels to configure.
1) Select the Port. The port is
defined by the output Infra-Red
emitter that is affixed to the face of
the VTR/DVD unit. Use the Right
arrow to move to the Command Set
panel.
2) Select the Command Set for your
VTR/DVD unit. The list is
organized by Manufacturer. There
are dozens of types of VTR/DVD
code sets. We have included
categories for most VTR code sets.
Locate the VTR/ DVD that most closely matches your type. In the case of
Sony, as most listings, there are several code sets. Test similar code set
names to find the one that best matches the VTR/DVD unit in use. Try
several of the available listings to find a match. For example, Sony_1,
Sony_2, Sony_3, etc.
Use the Right arrow to move to the Test panel.
3)
Select the command to issue as a test. Press the Select ( ) key on the
keypad to issue the highlighted command to the VTR/DVD unit.
Содержание magicbox aavelin
Страница 2: ... 2 Aavelin User Manual ...
Страница 10: ... 10 Aave ...