ClearCube M2010S, Руководство пользователя

Страница: 11 / 142

1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One floppy drive connector and two onboard ATA/100 connectors (one reserved
for the use of a compact flash card) are provided to support IDE hard drives or
ATAPI devices. The color-coded I/O ports include one COM port (an additional COM
header is located on the serverboard), a VGA (monitor) port, two USB 2.0 ports
(three additional USB headers are included on the serverboard), PS/2 mouse and
keyboard ports and two gigabit Ethernet ports.
ATI Graphics Controller
The M2010S serverboard features an integrated ATI video controller based on the
ES1000 32 MB graphics chip. The ES1000 was designed specifically for servers,
featuring low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the server chassis.
System Power
The M2010S chassis features a redundant 700W power supply composed of two
separate power modules. This power redundancy feature allows you to replace a
failed power supply without shutting down the system.
Serial ATA Subsystem
The chassis supports up to six 3 Gb/s Serial ATA drives. The Serial ATA drives are
hot-swappable units and are connected to a backplane that provides power and
control.
Note:
The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Front Control Panel
The control panel on the ClearCube M2010S provides you with system monitoring
and control. LEDs indicate system power, HDD activity, network activity, system