7
On/Off
Button
1
Data
Card
Slot
5
Cycle Day
Number
Display
Screen
Fertility
Status
Test Stick
Slot
m
Button
Knowing Your Clearblue® Easy Fertility Monitor
Before you get started, you will need your
Clearblue® Easy
Fertility Monitor, a
pack of 30 Test Sticks, and four AAA alkaline batteries. You must wait until your
next period starts before using the Clearblue Easy Fertility Monitor. In the
meantime you should read this instruction booklet fully and familiarize yourself
with the features below.
1. On/Off Button:
press once to turn on and again to turn off. The Monitor will
also turn off automatically after 30 seconds to conserve power, and the
Display Screen will go blank. You will be unable to turn the Monitor off while
it is reading a Test Stick.
2. Test Stick Slot:
this locates the Test Stick in the Monitor allowing it to read
the test result accurately.
3. Display Screen:
this provides details about your:
3a. Fertility Status.
3b. Cycle Day Number:
(day of your cycle)
Other information will also appear on the Display Screen such as when to test.
4.
m
Button:
this is used to set the Monitor at the start of each cycle. Refer to
pages 10 and 11 of this instruction booklet BEFORE pressing the
m
Button.
5. The Data Card Slot:
Clearblue offers a Datacard Reading Service.This service
provides a printout of your monthly cycle information stored in your monitor.
For further information, please call the Helpline or visit www.clearblueeasy.com
Test Stick
Cap
Sampling
End
Step by Step Guide to Using the
Clearblue® Easy Fertility Monitor
3a
3
3b
4
2
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 9