13
To Perform a Test
1.
Remove the Test Stick from its protective foil wrapper and
use immediately.
2.
Hold the Sampling End of the Test Stick pointing downwards
in your urine stream for 3 seconds only. This is long enough
to ensure the Sampling End is sufficiently wet. Alternatively,
collect a sample of your urine in a clean, dry container and
hold just the Sampling End in the urine
for 15 seconds
(refer
to question 18 page 26).
3.
Keeping the Test Stick pointing downwards, take the cap off
the handle and place it over the ‘wet’ end of the Test Stick.
Wipe off any excess urine from the Test Stick casing.
4.
You are now ready to insert the Test Stick into the Test Stick
Slot of the Monitor.
Please Note:
Test Sticks can NEVER be used more than once.
Only
Clearblue® Easy
Fertility Monitor Test Sticks can be used
with the
Clearblue® Easy
Fertility Monitor.
Test Stick when removed
from foil
Test Stick ready to insert
into Monitor
Take the cap off the handle
and place over ‘wet‘ end of
the Test Stick
Hold the Sampling End of
the Test Stick pointing
downwards in your urine
stream for 3 seconds only
Cap
Wet Sampling
End
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 15
