15
The Test Stick Symbol will flash while
the Monitor is reading a Test Stick
Monitor has finished reading a Test Stick
Inserting a Test Stick
• The Test Stick will not be recognized until correctly inserted. The symbol
will continue to be displayed until the Test Stick has been
properly placed and recognised.
• At the end of 5 minutes, the Monitor will ask you to remove the Test Stick,
which should be thrown away. Your Fertility Status will then be
displayed.
• If you do not remove the Test Stick within 60 seconds after the Monitor has
finished reading it, the Monitor will turn itself off. Don’t worry, just remove the
Test Stick and switch the Monitor back on to see your Fertility Status.
Number of Test Sticks Required
• You will be asked for a test on 10 days each cycle to build up an accurate
picture of your cycle. If the Monitor does not detect your LH surge with 10
tests, it will require an additional 10 tests for that cycle. This may happen if
your cycles are irregular or long. You should perform all of the tests requested
by the Monitor.
Please Note:
Always look at the Display Screen after you have inserted the Test
Stick to check that the Test Stick is being read. A flashing Test Stick Symbol
indicates that the Test Stick is being read.
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 17
