Clear-Com PL-PRO EF-1M, Инструкция по эксплуатации

Страница: 7 / 55

E F - 1 M I N T E R F A C E 1 - 1
QUICK START
1. Unpack the unit(s) and inspect for any damage that may have occurred during
shipping.
2. Attach the connection diagram label to a convenient surface, such as the bottom of the
EF-1M unit.
3. To connect the EF-1M directly to a Clear-Com Matrix (MX+3, MX+2) frame port,
connect an RJ-45 cable from the RJ-45 connector on the EF-1M rear panel to the
Matrix port.
For all other connections, wire the DB-15 connector on the EF-1M’s rear panel to the
other interfaces being used (fiber-optic, direct connection to another EF-1M, etc.).
Take care to wire to the correct pin assignments, including selection of Clear-Com or
RTS-type operation. Follow the manufacturer’s recommendations for cable type.
4. Set the rear-panel mode switches according to Table 1 in Chapter 2.
5. Repeat for each location.
6. Connect the respective party-line systems at each location to the 3-pin XLR on each
EF-1M’s back panel.
7. If there is a proper RS-422 data connection, or if the Matrix Direct mode switch is on,
the amber LED on the EF-1M unit’s front panel will illuminate steadily.
Follow these instructions
to quickly get the
system up and running.
1