Clear-Com PL-PRO EF-1M, Инструкция по эксплуатации

Страница: 20 / 55

3 - 1 E F - 1 M I N T E R F A C E
INSTALLATION
CONNECTING THE EF-1M INTERFACE
CONNECTING THE EF-1M TO A MATRIX PORT
To connect the EF-1M directly to a Clear-Com Matrix (MX+3, MX+2) frame port:
1. On the EF-1M’s back panel, set mode-switch 1 to the ON position.
The Data LED will remain ON, except when the unit is being nulled.
2. Connect a CAT-3, CAT-5, or above cable from the RJ-45 Matrix connector on the
back panel of the EF-1M to a port (RJ-45) on the Matrix frame.
The EF-1M is powered from the 2-wire intercom line. When the EF-1M is receiving
power, the Matrix will recognize it as a CCI-22 Two-Wire Interface.
3. Program the Matrix frame port. Refer to the PGM-WIN Configuration Program
Manual for instructions.
You can connect an
EF-1M unit directly to a
Clear-Com Matrix
frame port.
3