I C S - 2 0 0 3 I N T E R C O M S T A T I O N
1 - 1 4
• Mic Off —momentarily turns off the station’s microphone.
• Answer Back Talk/Clear—functions the same as the station’s “Answer Back”
selector. Holding down the switch activates a talk to a label in the answer-back
stack. To clear the label, quickly press and release the switch.
• Studio Announce—sends the output of the station’s selected microphone
(panel or headset) to the station’s Studio Announce (SA) audio output, and
activates the SA relay. The microphone output is not sent to the frame. The
SA output and relay are only present if the station has the OPT-100 Auxiliary
Audio I/O Option installed. (The SA options are described in “OPT-100
Auxiliary Audio Option” on page 1-15).
• Speaker OFF—turns off the station speaker, disabling all audible output from
the station.
• PTT: Activate All Talk Keys—implements a push-to-talk function for all talk
selectors. When the logic input is active, the station operates normally. When
the logic input is deactivated, all active talk selectors are disabled. Any controls
(relays, etc.) assigned to the labels are activated or deactivated along with their
assigned labels. The LED indicators associated with the active talk selectors
operate normally regardless of the PTT status. This input only controls
latched talks.
• Activate Talk Switch #1— equivalent to pressing the station’s first (leftmost)
talk selector; a momentary and latching activation.
• Activate Talk Switch #2—equivalent to pressing the station’s second talk
selector; a momentary and latching activation.
• Activate Listen Labels Button—equivalent to pressing the “Listen Labels”
button to display listen labels on any display expansion panel (XPL-12 or
XPL-22) connected to the station.
• PTT: Activate Two-Way Radio Keys—implements a push-to-talk function for
all two-way radio talk selectors. When the logic input is active, the station
operates normally. When the logic input is deactivated, all active two-way
radio talk selectors are disabled. Any controls (relays, etc.) assigned to the
labels are activated or deactivated along with their assigned labels. The LED
indicators associated with the active two-way radio talk selectors operate
normally regardless of the PTT status. This input only controls latched talks.
Programmable Relay
Each ICS-2003 station includes a relay controlled by the system program and
independent of the local station function. This relay can be assigned to any
label(s) in the system, which will activate whenever a talk or listen is set to that
label(s). If activating the relay is the only action desired, assign the relay to a
Control label. See the
Eclipse Configuration System Manual
for more details.
The relay can activate an external device, such as an applause light in a studio, a
cue light, or a security door lock. Any programmable relay in the system can be
activated from any station in the system, including a direct-inward-access caller.
Содержание ICS-2003
