Clear-Com ICS-2003, Инструкция по эксплуатации

Страница: 17 / 69

I C S - 2 0 0 3 I N T E R C O M S T A T I O N
1 - 1 1
Warning: All station key reassignments take place immediately upon exiting this
function. Active talk and listen paths will be disconnected when their labels are
removed.
System Configuration Menu
The System Configuration menu changes some of the Eclipse System
configuration parameters typically only available through the configuration
program. These are:
• “Assign Party Line Members”
• “Assign Fixed Group Members”
• “Assign Station Keys”
• “Assign Forced Listens”
• “Change Input Level Gains”
Assign Party Line Members
To add or remove an interface from a party line:
1. Choose the appropriate interface label category.
2. Choose an interface label.
3. A list of available party lines will be displayed. If the label is currently part of
any displayed party line, that party line(s) will be outlined. Add or delete the
label from a displayed party line by selecting it and pressing “Enter.”
Assign Fixed Group Assignments
To add or remove stations or interfaces from fixed groups:
1. Choose the appropriate interface label category.
2. Choose an interface label.
3. A list of available fixed groups will be displayed. If the label is currently part of
any displayed fixed group, that fixed group(s) will be outlined. Add or delete
the label from a displayed fixed group by selecting it and pressing “Enter.”
Assign Station Keys
To change the talk and listen selector labels on any station in the system,
including the selectors on accessory panels:
1. Choose a station.
2. Choose the selector to be assigned.
Note: It may be necessary to select a talk/listen window if the selector to be assigned
isn’t visible. Use the Pg Up and Pg Dn buttons for this.
3. Press the “Enter” button to display all labels available for assignment.
4. Select the desired label.
Note: If the desired label does not appear on this list, it may be because the station’s
access to that label has been inhibited (blocked) from the configuration program.
5. Exit to save changes or abort to abandon the changes.