Cleantecs SOLA-TECS C Series, Руководство по эксплуатации

Страница: 26 / 40

26
BA 0303788 R00 2019-03
Attaching and aligning
�
Place the Sola-Tecs C [1] on a flat
surface.
�
Insert the lance with the hexagon [2]
up to the stop on the connection PIN
[3] .
�
Make sure that the brackets [4] point
upwards. If the clamps do not point up-
wards, open the first clamp and turn the
lance until the clamp points upwards.
Risk of damage caused by seizing of
thread and hexagonal nipple
�A
Grease (DIN 51502: KP2G-30) hexagon
nipple Lance and thread connection
PIN before assembly.
This reduces the risk of seizing and any
resulting damage.
NOTICE
Attaching and aligning
[2] [4]
[3] [1]
Commissioning