Cleantecs SOLA-TECS C Series, Руководство по эксплуатации

Страница: 24 / 40

24
BA 0303788 R00 2019-03
Commissioning
Preparation for
mounting the
cleaner
In this step, the Sola-Tecs C is prepared
for installation.
Removing the transport cap
�
Clamp the cleaner [1] between your
thighs and pull the transport caps [2]
upwards.
Removing the transport cap
Checking the gearbox
[1]
[2]
Infobox The following tool
is required.
Risk of injury during disassembly
�A
Wear gloves during disassembly.
This will protect your skin from
abrasions and pinching.
CAUTION
Checking the gearbox
�
Place the cleaner on a clean sur-
face and turn the brush onto one side.
The second side must turn with it. The
gearbox should not make any chopping
noises.
Checking the high-pressure filter
�
Take the socket wrench [3] . Insert the
socket wrench into the connector pin
[4] until it is positioned on the HD filter.