Cleantecs SOLA-TECS C Series, Руководство по эксплуатации

Страница: 27 / 40

27
BA 0303788 R00 2019-03
[5]
[5]
Screwing on the telescopic lance
Risk of injury due to incorrect
installation of the joints
�A
Always hand-tighten and check the
connection points.
This will protect you from being injured
by connecting parts flying around
uncontrollably.
CAUTION
Screwing on the telescopic lance
and the modular pole
�
Screw the quick connector [5] onto
the connection PIN [3] by turning it
clockwise. Make sure that the connec-
tion PIN will slide when screwing it on.
�
Screw on until the Sola-Tecs C [1] is
firmly attached.
�
Tighten the quick-release screw
connection hand-tight.
Commissioning
Preventing damage to the quick
connector
�A
Tighten the quick-release screw
connection hand-tight. Do not use any
tools (pliers etc.) for tightening.
This will prevent chipping of the plastic
and damage to the thread.
NOTICE
Screwing on the modular pole