EN
26
Decalcifying
Use a commercially-available decalci
fi
er to decalcify the device. Make sure that the de-
calci
fi
er is suitable for devices that emit steam. To determine the ratio of water and de-
calci
fi
er to be mixed as well as the duration of use, please refer to the usage instructions
of the decalci
fi
er.
To remove deposits on the steam nozzles, use cotton swabs soaked in rubbing alcohol.
Remove the rubbing alcohol completely with a soft, damp cloth. Dry the surface thor-
oughly.
Storage
• Wind the mains cord and the water/power cord (
6
) up together.
• Store the device in a clean, dry, frost-free area that is not accessible to children and
animals.
Troubleshooting
If the device is not working properly, please check whether you are able to rectify the
problem yourself
fi
rst.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause
/
Solution
The device is not
working. The temper-
ature control light is
dark.
• Has the mains plug been inserted all the way in the socket?
• Is the socket defective? Try another socket and check the
fuse of the mains connection.
• Is the temperature control (
2
) still set to
0
? Set a higher
temperature.
Water is leaking from
the soleplate.
• Is the water tank (
7
) too full? Pour out some of the water
(see section “After use”).
• Is the temperature control (
2
set to a low temperature level?
Select a higher temperature level to produce steam.
No steam is pro-
duced.
• Is the water tank (
7
) empty? Fill the water tank (
7
).
• The device still has not reached the operating temperature.
Wait until the temperature control light (
3
) goes out.
• Is the temperature control (
2
set to a low temperature level?
Select a higher temperature level.
• Is the On/Off switch for the heat function of the water tank
(
C
) set to position
I
? Activate steam emission.
• Push the steam burst button
(
1
) 2 to 3 times to produce
steam.
• At high temperatures, the generated steam is dry and al-
most invisible. This will be intensi
fi
ed further through a high
environmental temperature. Set the temperature control
(
2
) to a lower temperature in order to check if the device
produces steam.
01175_DE-EN-FR-NL_A5_V1.indb 26
01175_DE-EN-FR-NL_A5_V1.indb 26
17.01.2017 16:09:10
17.01.2017 16:09:10
Содержание Z 01175
Страница 2: ...01175_DE EN FR NL_A5_V1 indb 2 01175_DE EN FR NL_A5_V1 indb 2 17 01 2017 16 08 59 17 01 2017 16 08 59...
Страница 54: ...01175_DE EN FR NL_A5_V1 indb 54 01175_DE EN FR NL_A5_V1 indb 54 17 01 2017 16 09 21 17 01 2017 16 09 21...
Страница 55: ...01175_DE EN FR NL_A5_V1 indb 55 01175_DE EN FR NL_A5_V1 indb 55 17 01 2017 16 09 21 17 01 2017 16 09 21...
Страница 56: ...01175_DE EN FR NL_A5_V1 indb 56 01175_DE EN FR NL_A5_V1 indb 56 17 01 2017 16 09 21 17 01 2017 16 09 21...
