Cleanmaxx 09069, Руководство по эксплуатации

Страница: 22 / 48

EN 22
Cleaning the HEPA Exhaust Air Filter
The HEPA exhaust air filter is located behind a protective grille on the back of the vacuum
cleaner.
1. Press the catch ( D ) of the exhaust air hatch towards the
filter and take off the exhaust air hatch at the same time.
2. Remove the HEPA exhaust air filter.
3. Tap out the HEPA exhaust air filter. Brush off with a soft
brush if necessary.
IMPORTANT: Do not clean the HEPA exhaust air filter
with water!
4. Brush or wipe out the filter compartment if necessary.
5. Insert the HEPA exhaust air filter into the filter compartment.
6. Insert the exhaust air hatch into the filter compartment. You should feel and hear it
click into place.
Cleaning the Housing and Nozzles
• Clean the housing with a slightly damp, soft cloth if necessary.
• Regularly remove hair and fluff from the nozzles.
Storage
• For storage purposes, hook the floor nozzle into the holder
on the back of the device (see illustration) and collapse the
telescopic tube as far as possible.
• Store the vacuum cleaner in a cool, dry indoor room out of
the reach of children and animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps below, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem Possible cause / solution
The device
generates no
suction.
• Is the plug not inserted in the mains socket correctly? Cor­
rect the fit of the mains plug.
• Is the socket defective? Try another socket.
• Has the fuse in the electrical distributor (fuse box) been trig­
gered? Reduce the number of devices in the circuit.
D
09069_DE-EN-FR-NL_A5_V2.indb 22 09069_DE-EN-FR-NL_A5_V2.indb 22 23.04.2020 08:47:02 23.04.2020 08:47:02