23
EN
Hand-held vacuum cleaner
11
Battery status display
12
On / Off switch
13
Motor unit
14
Battery (removable)
15
Ventilation slots
16
Filter holder with 2 motor
fi
lters
17
Dust container
18
Suction opening
11
12
14
15
18
17
16
13
Before Initial Use
1. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Never remove the rating plate and any possible warnings!
2. Attach the wall bracket with charging station (
2
) (see the “Attaching Wall Bracket with
Charging Station” chapter).
3. Charge up the battery (
14
) (see the “Charging Up the Battery” chapter).
Attaching the Wall Bracket with Charging Station
PLEASE NOTE!
■
Use the fastening material supplied to hang up the wall bracket with charging station.
If you are unsure whether the fastening material supplied is suitable for the wall, seek
advice from a specialist stockist.
■
Hang the wall bracket with charging station in a secure and solid place.
■
Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Drill holes at the correct distance into the wall and place dowels in them.
2. Screw the screws into the dowels. They should protrude by approx. 5 mm out of the
wall.
3. Hang the wall bracket with charging station (
2
) in the screws.