EN
22
The
combi nozzle
(
14
) is a combination of a crevice nozzle and
brush nozzle. Press the release button on the brush attachment
and slide it upwards at the same time to turn the crevice nozzle
into a brush nozzle. The brush attachment must be heard to
engage in place.
• The crevice nozzle is suitable for upholstery, cleaning the
inside of cars and for all nooks and crannies that cannot
be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furni-
ture, lamp shades, pro
fi
les and skirting boards, window
ledges, etc.
• The
nozzle adapter
(
16
) is required for attaching the combi nozzle.
• The
wall bracket
(
15
) is suitable for storing the device in a space-saving manner.
Before Initial Use
PLEASE NOTE!
■
Never remove the rating plate and any possible warnings!
1. Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
2. Attach the wall bracket (
15
) (see the “Attaching the Wall Bracket” chapter).
3. Charge up the battery (
7
) (see the "Charging Up the Battery" chapter).
Attaching the Wall Bracket
PLEASE NOTE!
■
Use the fastening material supplied to hang up the wall bracket. If you are unsure
whether the fastening material supplied is suitable for the wall, seek advice from a
specialist stockist.
■
Hang the wall bracket in a secure and solid place.
■
Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
To ensure that the vacuum cleaner can be hung in the wall
bracket correctly, it must be attached with the wider end facing
downwards and the hook at the top (see picture).
1. Place the wall bracket against the wall and mark out three
drill holes (on the left at the top and bottom, and on the
right).
2. Drill holes into the wall and place dowels in them.
3. Screw the wall bracket onto the wall.
