4
Figure 1
1.1
Product Information
The Fitting Inserter is designed to hold and locate soft tubing while inserting a fitting into
the tubing.
The minimum/maximum outside tube diameter is 1/4” to 3/4”
1.2
Safety Information
This product uses air cylinders and electronic sensors to pneumatically actuate the closing
jaws. The unit is not intended for anything other than flexible tubing.
CRD610 AUTOMATIC FITTING INSERTER SAFETY NOTICE
PLEASE READ CAREFULLY BEFORE CONTINUING
Warning
The fitting inserter should only be operated by trained, qualified
personnel who have read and understand this manual.
The owner of this CRD610 is responsible for training all personnel to properly
operate this unit. Failure to follow instructions may result in serious personal
injury.
Never, under any circumstances operate the “Automatic Fitting Inserter” with
the cover or guarding removed or any safety device disabled
.
1.3
Lifting & Moving Safety
Due to the weight of the unit (approximately 44 lbs/20 kg), the unit should always be
moved or repositioned by two (2) people to reduce the possibility of injury. (Figure 2)
