When electro - polishing, material is removed from the surface of the workpi
-
ece by specific electrolytes used in conjunction with an external DC source.
The material set free by the electrolyte is non - polluting and follows under
flattening conditions. In contrast to mechanical removal processes, flatte
-
ning by electro - polishing begins in the micro range and includes, during
longer polishing periods, larger structures which are rounded and flattened
off on their top surface. During electro - polishing, two different mechanisms
work simultaneously, one flattens the upper surface in the micro range and
the other achieves fine deburring in the macro range.
3.5.2 reverse
(11)
Main switch
(12)
Fuse 6,3 Amp
(13)
Connecting socket for mains cable
Operation Manual Clean Marker Brush
−
Page 11
11
12
13
11 open flap (with screwdriver)
remove fuseslider
exchange fuses
