instructions for use
1.3.2 risks involved when using the unit
The unit has been built in accordance with the latest technical standards
and the recognized regulations concerning safety. In spite of this, danger of
injury to the user or a third party and/or damage to the unit or other materi-
als could arising during use. The unit may only be used:
•
for the process previously determined
•
in a perfectly safe condition
1.3.3 guarantee and liability
Our „General Conditions of Sale and Supply“ apply. Claims of warranty
and liability made for personal injuries and material damages are excluded
if they are resulting from one or more of the following causes:
•
incorrect use of the unit
•
non - observance of instructions for use
•
unauthorised structural changes on the unit
1.3.4 safety measures
The instructions for use are to be kept near the unit and are to be passed
on by sale or exchange of the machine.
All safety and danger signs on the unit are to be clearly visible at all times.
1.3.5 risks arising from electrical energy
• Work on the power supply is only to be carried out by the same
electrician.
•
The electrical equipment is to be checked regularly.
•
Loose connections and damaged cables must be remedied immediately
1.3.6 Special risks arising from chemicals
Dealing with chemicals should be considered a special risk. Pay attention
to the Safety Data Sheets and the following remarks in these instructions.
•
Eye protection
Eyes should be protected from chemicals with goggles
•
Hand protection
Put on rubber gloves before working with chemicals
•
Clothes protection
Wear protective clothing before using chemicals (acid - proof apron, wor
-
king coat)
•
Breathing protection
Fumes arise when using chemicals. Always wear a face mask!
•
accident with chemicals
Should chemicals come into contact with eyes in spite of wearing
goggles, then:
• rinse the eyes with plenty of clear water
• seek medical attention.
Operation Manual Clean Marker Brush
−
Page 6
