5.1.1 unit adjustments for cleaning for clean marker brush devices
selector switch (see page 10)
5.2 cleaning With clean marker brush attachments
5.2.1 Tips for maximum cleaning effect
With the Clean Marker brush attachment you can clean even inaccessible
parts. The short brush shows more powerfull performance, the long brush is
especially for big areas. Chance the brush in time to avoit short circuits.
Slag and scale spots can only be removed by blasting
(Clean Marker Brush-T and Brush-TP)
5.2.2 the „cleaning“ process
• screw on the brush attachment
• adjust the unit according to Chapter 5.1.1
• fill about 1 cm Greinox 1000, 2000, Polish or Rapid into the wide-neck
container more can be filled into the containers for pump units
• moisten the tool
• run the tool over the bloom until the surface is clean
To avoid white edges on the work piece: polish the cleaned
work piece with the cleaning cloth supplied, lightly moistened
with water and Neutralyt.
Croping the brush will increase performance.
On level 3 short circuit signs may appear. It may be necessary
to chance down on level 2.
5.3 etching With the clean marker (Flat tOOl)
5.3.1 Tips for maximum etching effect
Every electrolyte contains salts. Depending on the material, these salts
can have a strongly oxidizing effect. Extreme cleanliness must be used when
handling the chemicals. Avoid carry - over of electrolytes and wash your
hands frequently. Make sure of good power contact and moist felt. Felt which
is too dry restricts the flow of power. Stencils become clogged with salts and
metals after a while. They should also be rinsed and cleaned frequently.
Electrolyte can also be used for cleaning stencils. Small surfaces can best
Operation Manual Clean Marker Brush
−
Page 13
a
b
c
d
selector switch
1 pickling with brush
2 pickling with brush
3 pickling with brush*
4 pickling with electrod*
5 polishing
6 dark marking
7 light marking*
brush attachment 1 (A) brush attachment 2 (B)
marking stencil (C)
+ marking felt 1
marking stencil
60° (D) + cleaning felt
symbol
*not with Clean Marker Brush-E
