6 Nord WaVE rEFErENCE
| 21
AmouNt
knob
this is used to set to what extent the signal from the LFo
should affect the selected destination.
range: 0 to 10
Poly
mode
In Poly mode, each individual voice will be affected by its
own LFo. Poly mode is activated by pressing the
Poly
button (
Shift
+ LFo destination button). this mode is
available to LFo 1 only.
When Poly is not activated the LFos will be synchro-
•
nized to each other.
SiNgle
mode
With single mode activated, the LFo plays a single cycle
waveform once without repeating. Single mode is available
to LFo 2 only.
the Single Mode is also a polyphonic mode, each voice
•
will have its own independent LFo.
Modulation Envelope (
mod eNv
)
the Modulation Envelope is an envelope with attack,
decay/release and amount controls. It sends out a control
signal that can be used to modulate various destinations in
the Nord Wave. the modulation from the envelope can be
both positive or negative, this is determined with the
mod
eNv AmouNt
knob.
the image above illustrates the Modulation Envelope with
attack and decay parameters.
the image above illustrates the Modulation Envelope with
attack and release parameters.
the zero level of the Mod Envelope relates to the
•
current setting of the selected target parameter. the
maximum modulation amount spans to the intensity set
by the
mod eNv Amt
knob.
AttAck
knob
the
AttAck
knob sets the time it should take for the en-
velope to reach the maximum modulation level after you
have pressed a key.
range: 0.45 ms to 45 s
dec/rel
knob
Sets the decay or the release time of the envelope, de-
pending on whether the Mod Env is set to the ad or the ar
mode.
range: 3.0 ms to 45 s
Ar
button (
Shift
+ Destination Select button)
the
Ar
button toggles between the attack/decay or the
attack/release mode:
AR setting disabled
the
dec/rel
knob controls the decay time of the enve-
lope. this is the time that it takes for the envelope to fall
back to zero again after it has completed the attack phase.
the envelope has no Sustain Level in this mode.
AR setting enabled
the
dec/rel
knob controls the release time of the
envelope. this is the time it takes for the envelope modula-
tion level to fall back to zero again after the key has been
released. the envelope’s Sustain Level is then set to a maxi-
mum amount (according to the amount parameter).
AmouNt
knob
the
AmouNt
knob sets the intensity of the modulation.
range: -10 to +10
a setting of 0 will produce no modulation.
•
a negative value will produce a inverted mod envelope.
•
a positive value will produce a positive mod envelope.
•
