Clavia Nord Wave, Руководство пользователя

Страница: 14 / 76

14 | Nord Wave User Manual v1.1
Assign a Morph source to a destination
Hold down a
1
morPh Source
button.
If this source has any previously assigned Morph des-
tinations, these destinations LEds will light up.
Operate a Morph Destination parameter.
2
the selected Morph destination’s green LEd will indi-
cate that a Morph is active.
The LCD will indicate the parameters original value and the
3
Morphed value.
Numerical sort order
Lead 2:17
Freaky Nord
Category sort order
F 2:17
Freaky Nord
Alphabetical sort order
In this example the filter cutoff will be Morphed from
its original setting of 62hz to 1.9khz during the full
travel or range of the Morph source.
Release the
4
morPh Source
button.
When the Morph source is operated, the parameter’s
value will change accordingly and the sound will
change.
To edit a morph range from a Morph Source:
Press the corresponding Morph Source button and turn
•
the destination’s knob to a new position.
To clear all morphs from a single Morph Source:
Press
• Shift
+ the corresponding Morph Source button.
To clear a single Morph destination:
hold down the corresponding Morph Source button
•
and operate the parameter knob to its original position,
where the Morph LEd will be turned off.
Morph Mode
Morph Mode provides you with a great overview that can
simplify setting up and adjusting multiple Morph destina-
tions at once.
Double-tap on one of the Morph Source buttons.
1
the Morph Source button flashes continuously, and
the LEds will show any of the associated Morph des-
tinations.
Operate a Morph Destination parameter.
2
the selected Morph destination’s green LEd will indi-
cate that a Morph is active.
The LCD will indicate the parameters
3
original value and the Morphed value.
Press any of the Morph Source but-
•
tons to exit Morph Mode.
When the Morph Mode is active you can:
operate any
•
morPh deStiNAtioN
to set-up or adjust
a morph.
hold down the
•
Shift
button and operate a
morPh
deStiNAtioN
to clear it.
Morph Destinations
a Morph Source can control virtually any important sound
related knob, Each one of these Morph destinations has a
green LEd next to it, which will be lit when a Morph is ac-
tive for this parameter.
Parameter name
LFO 1 Rate OSC MOD Amount FILTER Decay
LFO 1 Amount OSC MIX FILTER Sustain
LFO 2 Rate OSC SEMI TONES FILTER Release
LFO 2 Amount UNISON FILTER Freq
MOD ENV Attack AMP ENV Attack FILTER Res
MOD ENV Dec/Rel AMP ENV Decay FILTER Env Amt
MOD ENV Amount AMP ENV Sustain OUTPUT Level
OSC Shape 1 AMP ENV Release DELAY Amount
OSC Shape 2 FILTER Attack