14
41000664 Iss 05
ALWAYS ENSURE THAT THE MAIN
EXTERNAL ELECTRICITY SUPPLY IS
SWITCHED OFF BEFORE COMMENCING ANY
MAINTENANCE ON THIS HEATER.
To obtain the best results from the heater, it is
essential to avoid the accumulation of dust and
dirt within the unit on the air inlet and discharge
grilles. For this reason regular cleaning is
necessary, paying particular attention to the
removal of dirt build up on the rotor blades.
Cleaning of the fan is best carried out with a soft
brush.
A single drop of light oil should be applied to the
motor bearing from time to time.
The product should be serviced annually.
Servicing shall be undertaken by a competent
person
Step 1
Undo screws securing the grille.
Step 2
Adjust the grille by turning the screw inside with
an allen key.
Step 3
Remove 4 screws
securing the top
of the case and
remove (not
Chassis version)
Step 4
Slacken two bolts on
both ends.
Remove three bolts
securing the access
plate.
Carefully hinge down the access plate.
Note Take the weight as access plate swings down.
Step 5
With a soft brush clean away any dust from the
motor and elements.
Check all connections and components for
soundness or signs of deterioration and replace as
necessary.
Re-assemble and test.
7. Servicing & Maintenance
