background image

  

 

41000664 Iss 05 

Instruction Manual 

INDEX

                                                                                   

Section

 

 

Installation Requirements  ---------------------------------------------------- 1 
Dimensions  ---------------------------------------------------------------------- 2 
Technical Specifications  ------------------------------------------------------ 3 
Wiring Details  ------------------------------------------------------------------- 4 
Energy Saving Configuration  ----------------------------------------------- 5 
Installation Details  ------------------------------------------------------------- 6 
Servicing & Maintenance  ---------------------------------------------------- 7 
Spare Parts  ---------------------------------------------------------------------- 8 
Fault Finding   ------------------------------------------------------------------- 9 
Parts Replacement  ----------------------------------------------------------- 10 
User Instructions  -------------------------------------------------------------- 11 

WARNINGS

 

 

1 This appliance must only be installed by a competent person in accordance with the requirements 

of the Codes of Practice or the rules in force. 

2 All external wiring MUST comply with the current IEE wiring regulations. 

3 Warning this appliance must be earthed.  

ScreenZone 

HE8360, 8370 & 8380 

Large Commercial 

Electrically Heated  Air Curtains. 

Installation and Operating Manual 

Содержание ScreenZone HE8360























Отзывы: