Bluetooth music streaming
6
Two seconds after releasing button 7, the display will show “auto” and revert back to
pre set selection mode.
If the station that you are listening to supports radio text, the transmitted information
will scroll across the display at the bottom whilst showing the station name and pre
set number across the top. If there is no radio text available or a weak signal, then
the display will show “no Radio Text”
The FM scan can be performed at any time but please note that any previously stored
stations will be replaced with those found during the new scan.
Stereo/mono, If you are listening to a weak FM station you can switch the tuner to
Mono which may help eliminate any unwanted background noise/interference. Press
button number 6 briefly then turn button 7 until the display shows Audio Setting
then hold button 6 for 2 seconds, you can then turn button 7 to scroll between
“Stereo allowed “ and “Forced Mono”. Select “Forced mono” Stereo allowed” then
hold button 6 for 2 seconds.
Bluetooth
The Classic 200 can play music from a Bluetooth music device or mobile phone.
Firstly you should pair the device in question by turning on Bluetooth in its menu and
searching for the Classic 200. You should then select the device named Autosound
and connect to it. If your device requests a pin number, enter 0000.
Each time you turn on the Classic 200, your device should connect automatically,
however, you should make sure that your device is set for automatic connection of
Bluetooth devices.
The “BT” symbol will flash on the display until the device is connected then it will
become static indicating there is a Bluetooth link. “BT” is not shown in DAB/FM
mode. Depending on your device, the radio display may show “BT Talk” and mute
the sound momentarily each time it connects.
You can now play your music via Bluetooth by selecting BT Music in the menu.
Turning button 7 anticlockwise will select the previous track and turning clockwise
will select the next track.
Pressing button number 2 will pause the music and pressing it again will resume play.
If your Bluetooth device is also a mobile phone, pressing button 3 will dial the last
number, pressing again ends the call.
