Classic Car Stereo CR017 Classic 200 Скачать руководство пользователя страница 5

5

FM Radio

then turning button 7 scrolls between yes and no. Select yes then hold button 6 for 2 

seconds, the relevant stations will now be removed from the memory.
System, to perform a factory reset,  press  button  6  then  turn  button  7  until  the 

display shows System, turn button 7 until the display shows factory reset. Turn button 

number 7 to select yes, then press and hold button 6 for 2 seconds, the unit will now 

revert back to the factory settings and cancel any settings that you may have made.
Software version, the software version can be displayed by pressing button number 

6 then turning button 7 until the display shows “SW”, pressing and holding button 6 

for 2 seconds will display the software version.
The factory reset and software version functions can be selected in either DAB or FM 

mode. 
To exit from any of the settings selected press button number 6 briefly or wait for 30 

seconds.

FM radio

To tune in the FM radio select the FM mode, the display will show  87.5MHz (no radio 

Text).
Press button number 6, the display will show Scan Setting, press and hold button 

6 for 2 seconds then the display will show scan settings all stations. Turning button 

7 will scroll between All Stations and Strong Stations. Select either All Stations or 

Strong Stations  then press button 6 briefly to exit, now press and hold button 7 to 

begin the scan.
The display will show “scanning” and will automatically set up to 18 preset stations 

into the memory. The number of stations found can be seen at the top right hand 

side of the display during scanning. 
To select any of the presets, turn button 7 to scroll through 1 to 18 or you can press 

buttons 2, 3, 4, or 5 to select the first 4 presets.  Please note, the radio may not 

necessarily find 18 stations depending on  the reception area.
You can then set any of the FM stations to preset buttons 2, 3, 4, and 5 by turning 

button  7  to  select  the  required  station,  then  press  and  hold  the  relevant  preset 

button,  the display will show that the station has be set by displaying “stored”.  This 

will not alter any DAB stations that you may have previously stored.
Manual tune, to manually tune an FM station, turn and hold button number 7 until 

the  display  will  shows  “Manual  tune”  then  release,  now  turning  or  turning  and 

holding button 7 will manually tune up or down accordingly.

Содержание CR017 Classic 200

















Отзывы: