3
Audio Source selection
To turn the unit on press button number 1
To turn the unit off press button number 1 for 2 seconds
To adjust the volume (00 to 46) turn button number 1 clockwise to increase and anti
clockwise to decrease the volume. Please note, every time you turn the unit on, the
volume will default to volume level 17.
Pressing button number 1 will scroll between the clock display, bass, treble, balance,
fader, sub woofer, loudness, equaliser, beep and 12/24 hour. After selecting/adjusting
the setting, the unit will exit the selected mode after 5 seconds.
To adjust clock press button number 1 once to display clock then turn clockwise to
increase minutes and anti clockwise to increase hours. The clock can be displayed in
12 or 24 hour mode. (see below)
To adjust the bass ( -10 to + 10) press button number 1 twice then turn clockwise to
increase and anti clockwise to decrease
To adjust the treble ( -10 to + 10) press button number 1 three times then turn to
increase and decrease as above
To adjust the balance ( L10 to R 10) press button number 1 four times then turn to
adjust the left to right volume (balance 00 is equal volume left and right)
To adjust the fader front to rear ( F 10 to R 10) press button number 1 five times then
turn to adjust front to rear volume levels. (fader 00 is equal volume front and rear)
To adjust the sub woofer volume ( - 10 to + 10 ) press button number 1 six times then
turn clockwise to increase and anti clockwise to decrease the sub woofer volume.
(-10 is minimum and +10 is maximum volume) Please note you will require a separate
sub woofer/amplifier for this function to work.
To adjust the loudness ( on/off) press button number 1 seven times then turn to
scroll on/off. When selected, “LD” will be shown in the display in BT music, aux in
and USB/I pod mode.
To select the in built equaliser settings press button number 1 eight times then turn
to scroll between the options ( ie. flat, classical, pop, rock, off.) If you wish to adjust
the bass/treble separately, you will need to turn the equaliser to the “off “ setting.
To turn the beep on/off press button number 1 nine times then turn to scroll between
on and off ( with beep on there will be an audible beep through the speakers each
time you operate a control on the unit.
To select 12 or 24 hour clock press button number 1 ten times then turn to scroll
between 12 and 24 hour clock display. This can be done either before or after
adjusting the time setting.
