DAB / DAB+
4
Please note the clock is only displayed for 5 seconds after pressing button number 1.
To select the mode, press button number 7 to scroll between dab/fm/bt music (USB
or I Pod if connected) and auxiliary input.
Dab /DAB +radio operation
To tune in the dab radio press button number 6, the display will show full scan then
press and hold button number 6 for 2 seconds to start the station search. The display
will show scanning and a progress bar and the number of stations found will be
indicated on the top right of the display. Alternatively you can press and hold button
7 to scan.
The radio will then store all the stations that have been found in alphabetical order
and begin playing the first station in that order.
To select a specific station, turn button number 7 until the relevant station name is
displayed. The display will show connecting and will begin to play the station. If you
are out of the station reception area or if the signal is too weak, the display will show
“service not available”. Alternatively you can turn and hold button number 7 to scroll
through the stations faster either clockwise to scroll forwards or anti clockwise to
scroll backwards. Releasing the button stops the scrolling.
You can pre set up to four stations by firstly selecting the station then press and hold
the pre set buttons numbers 2, 3, 4 or 5 for 2 seconds. The display will show “preset
a stored”. The pre sets can be over written at any time by repeating the procedure.
To manually tune the radio press button number 6 then turn button number 7 to
show manual tune, then press button 6 for 2 seconds, turning button number 7 will
now manually tune showing the station frequency.
To select the DRC (Dynamic Range Compression) function, press button number 6
then turn button number 7 to show DRC in the display. Press button number 6 for
2 seconds then turn button number 7 to scroll between off, low and high. Press and
hold button 6 to store the selected level.
Dynamic Range Compression; this feature can make it easier to hear quieter sounds
whilst in a noisy environment. The DRC function will increase the volume of quieter
parts and decrease the volume of the louder parts of a radio broadcast. Please note
that not all DAB broadcasts support the DRC function.
Prune, this feature allows you to remove any DAB stations from the memory that can
no longer be received either due to frequency changes or being out of the station/
reception area. To select this function press button number 6 then turn button
number 7 until Prune is shown in the display, press and hold button 6 for 2 seconds
