Classic AutoAir 1971-1973 Mustang A/C system, Руководство по установке

Страница: 7 / 38

7
Remove Glovebox, Console (optional),
Facia, Radio and Bezel, and set them
aside for reinstall later
(see figure 1).
The removal of the Original Heater Assembly can be
accomplished by disconnecting three control cables. One is
attached to the Heat/Defrost door (see figure 2). One is
attached to the Temperature door, and one is attached to the
Vent / Heat door (see figure 3). Disconnect the electrical
harness from the assembly. Also remove attachment screw
located in front of the air inlet (see figure 4).
FIGURE 4
FIGURE 3
FIGURE 2
FIGURE 1
INTERIOR
COMPARTMENT
When retaining parts it’s a
good idea to store parts in a
zip lock bag, labeled with
info where the parts came
from and what size/type of
tool is needed to reinstall. Cleaning
the parts before you need to reinstall
them is a good idea too.
GOOD IDEA
www.classicautoair.com • 866.435.7801