Classic AutoAir 1971-1973 Mustang A/C system, Руководство по установке

Страница: 10 / 38

10
Remove The Heater Control Head From The Dash.
1) There are four OEM screws that hold your control head to the dash. Remove
and retain these screws. Remove the control head assembly (see figure 7).
2) Remove the OEM blower switch knob. Retain the screw, you will use it again
shortly. Remove the control cables and the original blower switch and set aside
(these will not be reused, see figure 8).
3) Attach the new blower switch bracket to the top part of the back of the face
plate (see figure 9-10), utilizing the OEM screw, and then attach the blower
switch to the bracket with the two supplied #6 - 20x3/8" screws.
Retain all the OEM parts that
you remove, at least until the
installation is completed.
GOOD IDEA
(OEM switch
not reinstalled)
Retain this
OEM screw
#6 - 20x3/8" Screws
FIGURE 8
FIGURE 7
FIGURE 9
FIGURE 10
www.classicautoair.com • 866.435.7801