7
PARTS NEEDED
TOOLS NEEDED
DELUXE ARCHED SNOW THROWER CAB
Locate the small hem tunnel on the
inside of the fabric shell [T]
(Top, back). Insert back hoop pole
assembly through the hem tunnel.
To attach the back hoop, grasp the back hoop pole assembly by
the outside set of side poles and bend into a curve. While grasping
both ends of the assembled back hoop, lift and insert into the ends
of the back poles into the two back holes of the X braces [F].
NONE
ASSEMBLE AND INSTALL BACK HOOP (FIG. 1-4)
WARNING:
Use care when assembling the front and back hoop poles. Poles under tension can slip out of the metal/
plastic sleeves causing serious injury. Safety goggles are recommended.
STEP 2 continued...
1
2
3
4
Pull the fabric shell until it is in
the center of the pole assembly.
+
To assemble the back hoop connect the five back hoop rods [G] together with attached PVC tubes,
so the completed pole has a metal tip on both ends.
G
Back Hoop
T
G
G
G
F
