9
PARTS NEEDED
TOOLS NEEDED
DELUXE ARCHED SNOW THROWER CAB
STEP 3
Assemble mounting parts as shown on your snow thrower handlebar.
Face [N] forward on machine.
Whenever possible mount top U-bolt [P] above crossbar as shown.
Hand tighten. Later adjustment may be necessary
to line up with the frame mounting posts.
Slide the lower mounting posts [M] onto the installed mounting post
clamps [N], so that bolts are facing the outside of the snow thrower.
1
1b
2
+
N
O
P
R
M
ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER (FIG. 1-3)
Note: Exact positioning may vary depending on your machine.
Note: In some instances, it may be necessary to mount the top U-bolts [P] above the handlebar crossbar support.
This will help the assembled cab sit higher for added clearance.
1/2 in. Box
Wrench
OR
OR
1/2 in. Socket
Wrench
Adjustable
Wrench
N
M
O
P
R
S
S
N
P
O
N
S
R
Repeat on the other side.
Important: Make sure no wires are secured inside the U-Bolt [P].
3
N
M