FITTING INSTRUCTIONS
DRYER UNIT
Drawn up: 07/09/2015
Document number : 30011288
Page 7 of 21
Revision: A
M5x16mm screws
2
M5x12mm socket button
head scerws
8
M5 flange nut
2
M3 flange nut
2
M5x10mm socket counter
sunk head screw
8
M5 prevailing torque nut
8
M6 Washer
8
Dryer harness lower section
1
Edge protection (**mm)
1
120x2.5mm cable ties
25
4.
Before fitting.
Before fitting the dryer unit to the machine ensure that:
The unit is setup for the correct machine direction (i.e. Left hand or right hand exit) and alter
this as required (
6
).
There is sufficient space for the unit to be installed.
Be sure to peal back any laser film on the side of the machine on which the unit is to be
installed.
5.
Warning and safety information
The unit should only be operated at or within the voltage specified on the rating plate on the main
machine. The installer and user are responsible for ensuring the installation and operation of this
machine are in accordance with local and national regulations.
Do not insert any items or parts of your body between moving components, as this could cause injury.
Beware of touching or placing items onto the wash tunnel of the machine, as this can get hot during use.
The dryer unit weighs more than 50kg and should be handled with care. When installing the unit a lifting
trolley should be used.
