FITTING INSTRUCTIONS
DRYER UNIT
Drawn up: 07/09/2015
Document number : 30011288
Page 12 of 21
Revision: A
6
Locate RL5 (drive motor relay)
7
Remove the wires with the green
insulators from the coil and replace
them with the new wires.
Fit the wires from the machine
harness in the male terminals
8
Fit the dryer harness terminal block to
the front of the wash tank and fasten
using the 2x M3 flange nuts provided
9
Route dryer harness along the
machine harness and cable tie in
place.
10
Close the control panel
DO NOT refit the front panel
DO NOT turn on power to the
machine.