FITTING INSTRUCTIONS
DRYER UNIT
Drawn up: 07/09/2015
Document number : 30011288
Page 4 of 21
Revision: A
1.
Introduction
Installation:
Installation should only be carried out by a
Classeq
approved technician, in accordance with current
regulations and within our instructions.
Each section of this instruction is important in achieving a good installation of the dryer unit. DO NOT
skip any sections.
Familiarise yourself with
ALL
the instructions before attempting the fitting.
Repairs and spare parts:
The appliance must only be repaired by a
Classeq
approved technician, using genuine
Classeq
spare parts, failure to do so could invalidate any warranty and relieve the manufacture of all liability.
Modification:
Classeq
reserves the right to modify either the appliance or the contents of these instructions without
notice.
CAREFULLY READ THESE INSTRUCTIONS, BEFORE INSTALLING THIS APPLIANCE.
INCORRECT INSTALLATION, ADAPTATIONS OR ALTERATIONS COULD RESULT IN INJURY OR
DAMAGE TO PROPERTY.
MALICIOUS DAMAGE, DAMAGE DUE TO NEGLIGENCE, OR FAILURE TO COMPLY WITH THESE
INSTRUCTIONS AND LOCAL LEGISALTION, OR UNAUTHORISED TAMPERING WILL INVALIDATE
ANY WARRANTY AND RELIEVE THE MANUFACTURER OF ALL LIABILITY