FITTING INSTRUCTIONS
DRYER UNIT
Drawn up: 07/09/2015
Document number : 30011288
Page 15 of 21
Revision: A
7
Remove and retain 11x
M5x12mm socket button head
screws and flange nuts on the
side that will have the dryer
fitted.
These will be used later to
fasten the unit in place.
9.
Preparing the dryer unit
Step
Description
Picture
1
Remove and retain the clamping
plates
2
Peal back all laser film on the mating
face to expose steelwork.
3
Fit the cassette link plates to the dryer
cassette and fasten in place with 4 x
M5x10mm socket counter sunk head
screw, M6 washers and M5 prevailing
torque nut.
Take note of washer placement
