Page 6
5.0 Operation
5.0 Operation
5.1 Machine description :
The design of commercial glass and dishwashing machines differ from their domestic versions as
they are designed to run nearly continually for many hours.
Commercial appliances, wash results can be effected by external considerations such as incoming
water temperature, pressure, hardness and choice of chemicals,
‘Classeq’
recommends that your
appliance is either connected to a water softener or a softened water supply, for further details on
water softeners please contact the supplier of your appliance.
5.2 Controls :
Prior to switching the machine ON, ensure that you are familiar with the controls on the front fascia
of the appliance and the location of the isolator for mains electricity and water supply.
C200G, C500U, C300G, C750U
1.
Power lamp (Red)
2.
ON / OFF Button
3.
ON / OFF Lamp (Yellow)
4.
Machine Ready lamp (Green)
5.
Wash Button
6.
Cycle lamp
7.
Selector switch
(optional on C850P only)
In addition to these switches there are two further
switches on the front of the appliance
•
Rinse Aid Prime button
•
Refer to section 4.1.1 of this manual
•
Continual wash button
(optional)
•
The function of this button will only work
when the machine is full and switch ON.
•
Once depressed, the wash pump will run
for 10 minutes, during the cycle lamp 6 will
be illuminated.
•
At the end of the 10 minutes neither the
rinse or drain pumps will operate
•
This button must only be used when using
either lime scale remover or renovate
chemicals are being applied.
•
Classeq recommends that once the cycle
has been completed that the machine is
switched OFF and allowed to fully drain
down
1
2
3
4
5
6
C850P (only)
2
1
3
4
5
6
7
