manualshive.com logo in svg

Classe Audio CP-800, Руководство пользователя

Поделиться
Скачать
Classe Audio CP-800 Скачать руководство пользователя страница 50

50

Continued

Made for:

n 

iPod touch (5th generation)

n 

iPod touch (4th generation)

n 

iPod nano (7th generation)

n 

iPod nano (6th generation)

n 

iPod touch (3rd generation)

n 

iPod nano (5th generation)

n 

iPod touch (2nd generation)

n 

iPod nano (4th generation)

n 

iPod touch (1st generation)

n 

iPod nano (3rd generation)

Made for:

n 

iPhone 5

n 

iPhone 3GS

n 

iPhone 4S

n 

iPhone 4

n 

iPhone 3G

n 

iPhone

Made for:

n 

iPad (4th generation)

n 

iPad mini

n 

iPad 2

n 

iPad

n 

iPad (3rd generation)

AirPlay:

AirPlay works with iPhone, iPod, and iPod touch with iOS 4.3.3 or later,  

Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or   

later.

                          

 

Classé and the Classé logo are trademarks of B&W Group Ltd., Worthing U.K. All rights reserved.  

AMX

®

 is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.

 

Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

Control 4™ is a trademark of Control 4 Corporation of Saltlake City UT. All rights reserved.

Savant

®

 is a registered trademark of Savant Systems, LLC of Hyannis, MA.

“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed 

to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet 

Apple performance standards. Apple is not responsible for the operation of this device or its compliance with 

safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect 

wireless performance. 

iTunes, AirPlay, iPad, iPhone, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. 

and other countries. 

Содержание CP-800























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды