Classe Audio CP-800, Руководство пользователя

Страница: 34 / 54

34
Important note on Fkey use
All Classé Delta and CT series remote controls provide at least four Fkeys.
Commands F1-F4 on every Classé remote send the same IR signals as F1-F4
on every other Classé remote, so you do not need to worry about which remote
you’ve picked up. Thus
F1
on the CP-800’s remote control sends the same
infrared signal as F1 on the CD player’s remote control and so on.
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same Fkey . Doing
so can result in two components doing two different things at once, in response
to a single press of a button on the remote control. This can sometimes be
useful. As an example, F1 could set the CP-800 to the CD Player input, and
also set the CD player to
Play
, both from the press of a single Fkey.
DC Triggers
The CP-800 has two available trigger controls. Each may be programmed using
normal 12 V or “inverse logic” (0 V) settings. The ability to change the way the
trigger operates can solve installation-specific problems that otherwise require
external devices that add to both the cost and complexity of your system.
The triggers can be associated with the Standby mode, a specific source or a
configuration. To use the Inverse Logic option, simply check the Inverse Logic
box on the Trigger Setup page.
For more information on the potential use of DC triggers, we recommend you
speak with your authorized Classé dealer.