CLAS PE 8000M, Руководство пользователя

Страница: 34 / 48

PE 6001
MOVABLE ELECTRO HYDRAULIC LIFT
PE 8000M
BODY REPAIR LIFT TABLE MONO CYLINDER WITH
MECHANIC LOCK 3T
34
CONNECTING THE OIL HOSES :
Follow the «oil line diagram» to connect the hydraulic oil hoses.
Only a competent and authorised person is allowed to carry out the operations. Pay
particular attention to the protection of the oil hose connections.
• When connecting the oil lines, pay attention to the protection of the oil line
When connecting the oil lines, take care to protect the oil line connection to prevent dirt
from entering the hydraulic system.
ELECTRICAL CONTROL INSTRUCTIONS
(See image of control panel)
Picture 6
LIFTING
• Release the SB1 button, the oil pump operates immediately. The hydraulic oil is sent to a
into a hydraulic cylinder. The platform is being lifted and the safety pawl is also lifted by a
pneumatic loop.
• Release the «UP» button, the oil pump stops immediately. The platform stops lifting and the
safety pawl drops onto the safety equipment because the solenoid air valve is de-energised,
then closes the air loop.
DOWN :
• Press the SB2 button, the safety catch is lifted due to the air loop connection.
The descent electromagnet turns on due to electricity. The platform descends.
• Release SB1, the safety catch is lifted due to the air loop connection.
The platform stops lowering and the safety catch falls on the safety equipment.
The lifting table stops automatically when it reaches a height of about 500 mm.
• Release the DOWN button and press LOCK SEC. Press the SB3 button and the platform will
lower again.