CLAS PE 4002, Руководство пользователя

Страница: 44 / 52

PE 6001
DOUBLE SCISSOR LIFT 3T
PE 4002
4 COLUMNS POST LIFT 5T AUXILIARY LIFT 3.5T
44
EMERGENCY STOP
Press the «EMERGENCY STOP» button SB0, to turn off all operating circuits when the machine is
abnormal.
LOCK
When you press the «LOCK SEC. DOWN» button when the platforms are higher than 300mm, the
deck will lock or lower a little to lock.
Adjusting the oil top-up of the submachine
1 Open the shut-off valve ‘H’ ‘I’.
2 Press the ‘UP’ button to allow the platform to rise to the desired
height.
3 Close valves ‘H’ and ‘I’, press the ‘DOWN’ button; the platform will
descend to the ground.
4 Repeat the operation as above for 3~4 times.
5 Press ‘UP’ button to make the platform rise to a height of about
300mm. If the two platforms are not at the same level, the left
platform is a little lower (P1), activate the ‘oil top-up valve I’.
Otherwise, activate the ‘oil top-up valve H’.
6 Click the «UP» button, then the single side of the platform is lifted
alone. Once both platforms have the same height, close the ‘H’ or ‘I’
oil top-up valve, ‘the oil adjustment process is fi nished.
Only an authorized person can operate, do the alignment only for the alignment model
after the platforms are locked.
Only an authorized person may operate, align only for the alignment model after the platforms
are locked.
Lifting the rolling jack:
Manual or pneumatic jack:
Press the manual or pneumatic rolling jack switch to raise the rolling jack.
Lowering the Rolling Jack:
Manual or pneumatic jack:
Loosen the oil return valve on the manual pump or the other side of the switch on the pneumatic
pump, and lift the insurance on the rolling jack at the same time, the jack will begin to lower.
Locking the rolling jack:
-Press only the oil return valve on the hand pump or the switch on the air pump until the jack
insurance is engaged.