CLAS OH 6035, Руководство пользователя

Страница: 8 / 12

OH 6035
SERVICE GARAGE JACK 3T 95mm
Lowering
1. Raise the vehicle and clear the jack stands.
2. Pull up the handle then turn the handle counter-clockwise.the handle is self-
return(Dead-man principle), you need to hold the handle until the jack back to
the initial position.
1. Both the maintenace and repair of the jack may only be performed by qualifi ed professionals.
2. Only original spare parts should be used.
3. When not in use,store the jack with saddle fully lowered. Keep the jack in a clean,dry place and
reach out of children.
4. f the oil level needs to be checked or refi lled,remove the fi ller plug and drain it’s contens into
a container. Make sure that no dirt enters with the new oil.
5. Too much oil will prevent saddle from lowering completely. Not enough oil and saddle will not
be able to rise to full height.
6. Do not use brake fl uid,turbine
oil ,transmission fl uid,motor oil or
glycerin.Improper fl uid can cause
premature failure of the jack and
the potential for sudden and
immediate loss of load.
Premium hydraulic jack oil is
recommended.
MAINTENANCE