CLAS OH 6035, Руководство пользователя

Страница: 7 / 12

OH 6035
SERVICE GARAGE JACK 3T 95mm
Capacity: 3T
Min Height.: 95mm
Max. Height: 515mm
Weight: 39.5kg
Dimensions: L. 772 x W.367 x H. 1225mm
Standard: Directive machinery 2006/42/EC, EN 1494:2000+A1:2008
Product lifetime : 8 years
1. Assemble the 2-piece with bolt and fixed T shape handlewith screw supplied.
2. Insert handle into the handle socket. Tighten the bolt on handle socket to prevent
accidental removal of handle while in use.
Lifting
1. Prior to operating the jack, remove any accumulated air from the system below:
• Pull the handle and turn it counterclockwise whilst held in this position
• Pump the jack several times to ensure internal lubrication and bleed the accumulated air
from the system.
2. Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on
the vehicle. Center jack saddle under lift point.
3. This jack are fitted with a foot pedal that gives a faster approach to the load.
4. Pump handle full stroke until load reaches desired height.
5. Transfer the load to appropriately rated jack stands.
CHARACTERISTICS
ASSEMBLY
USING INSTRUCTIONS