CLAS AC 5110, Руководство пользователя

Страница: 50 / 64

REF Function
During the actual test, the cause of the malfunction of the circuit under test can be determined by using scopemeter
to measure and observe the waveform of related circuit component, and comparing the component's waveform
with the referance waveform. This method is very applicable when you have detailed reference waveforms of the
circuit test points.
Press the USER OPTIONS to open the user options interface, then press F2 to open the REF interface (Figure 18).
Function Setting Description
Mode
Waveform
Setip
Storing or calling out waveform is selected.
Storing or calling out setup is selected
Storage 1,2,3,4,5,6
Memory's storage locations for the waveforms to be saved or recalled.
The scopemeter can store up to 1 setup and 6 groups of waveforms,
two channel's present waveforms can be simultaneously stored in a
same memory location.
Load Recall the saved waveform(s) from the specified storage location
Save
Save the present waveform(s) to the specified storage location or save
setup.
AC 5110 OSCILLOSCOPE