8
English
Instructions for use
Bear in mind that the air compressor is meant for intermittent operation.
Refer to the
Product description
section.
1. Make sure that the on/off switch (4) is set to OFF [ 0 ].
2. Plug the mains lead into an earthed wall socket.
3. Connect the air hose and the tool of your choice to the air outlet (1).
4. Set the on/off switch to ON [ I ] to start the compressor.
Never switch off the compressor by pulling out the plug or using the isolator switch (if fitted).
Always use the ON/OFF button on the compressor.
Connecting/Changing tools
Bleeding
A) The pressure gauge displays the pressure in bar,
kPa, psi and kg/cm
2
.
B) The pressure release valve is used to decrease
the air pressure in the object.
C) The trigger lever is used to increase the air
pressure in the object.
Connect the tyre inflator gun or other air tool to
the quick-connector on the air hose.
Pull the quick-connector away from the tool
to disconnect the tool from the air hose.
A
B
C
Care and maintenance
• Make sure that the on/off switch (4) is set to OFF [ 0 ]. Unplug the mains lead from the wall socket.
• Let the compressor cool before cleaning it.
• Clean the compressor by wiping it with a damp cloth. Use only mild cleaning agents, never
solvents or corrosive chemicals.
• Check the safety valve regularly by pulling the spring-loaded ring. If the safety valve is
working properly (and the pressure vessel is under pressure) air should seep out through
the safety valve.
Unplug the compressor from the electrical outlet if it is not to be used for an extended period.
Disconnect all the connected accessories and place the mains lead in the holder (3).
